Planning Your Cape York Adventure: 4 Key Preparations

When contemplating a journey to the iconic Cape York Peninsula, the conversation often turns to the daunting prospect of tackling its harsh off-road conditions, especially the notorious corrugations. In reality, with a strategic approach to these initial concerns, conquering Cape York can become an enjoyable and rewarding experience.

So, how can you prepare for the challenges of Cape York and make your first trip to this unique destination a reality? Here are four recommendations, drawn from our experience, that will empower you to conquer Cape York:

1. Tyre Pressures

Your tire pressures serve as the critical link between the road, your vehicle, and its suspension. Lowering your tire pressure allows your vehicle to better handle the unforgiving corrugations. The tires distribute their coverage more evenly over the corrugations, resulting in a smoother and more enjoyable ride. It’s essential to note that when towing a trailer, it’s advisable to reduce tire pressures for both your vehicle and the trailer. The correct tire pressure can significantly influence how your vehicle and anything you are towing navigate these challenging conditions.

2. Smart Packing & Storage Solutions

Maintaining the center of gravity (COG) of your vehicle is pivotal, especially when navigating rugged off-road terrain while towing. Achieving this requires smart packing techniques that prioritize placing heavier items lower and over the axles. This approach fosters a stable and secure towing experience. Although not everything can be stored low, smart packing helps safeguard your belongings from the harsh effects and vibrations of corrugated roads. At ZONE RV, our off-road caravans are thoughtfully designed with this principle in mind, featuring ample storage capacity strategically located throughout the caravan to optimize weight distribution, allowing you to position your items low and near the axles, ultimately contributing to safer towing conditions.

3. Drive to the Conditions

Embarking on a journey to Cape York is an exciting adventure, often constrained by limited holiday time. It’s easy to get caught up in meeting deadlines and pushing your vehicle to the limits on rough off-road terrain. While time constraints may be a factor, it’s essential to drive in line with the conditions to ensure a safe and enjoyable journey. Embrace the experience and adventure; it will make your arrival at the destination all the more rewarding.

4. Enjoy the Adventure

Cape York is an iconic destination, not only because you can stand at the tip of Australia but also due to the countless iconic locations along the way. From Fruit Bat Falls and Thursday Island to Daintree, Twin Falls, Elliot Falls, and many more, the adventure is as much a part of the journey as the destination itself. Embrace the adventure, savor every moment of the trip, and the memories will be all the more precious.

If you’re considering a trip to Cape York, Paul and Katie from The Feel Good Family have just completed their first Cape trip and have some exciting insights to share. Watch our latest video below and start dreaming about your next off-road adventure!

START YOUR JOURNEY

If you’d like to find out more about our 100% made-in-Australia composite off-road caravans, view our range today and build the caravan perfect for your adventures!

What are the benefits of a gasless off-road caravan?

6 reasons to think about a van with a gas-free interior

With a drive to create new caravans that are safer, more efficient, and easier to use than ever before, leading caravan manufacturers are now producing gasless caravans.

Also known as gas-free caravans, gasless models use their battery banks and rooftop solar system to run the air conditioning, induction cooktop, and other appliances, all without the need for gas bottles.

So what are the benefits of a gas-free interior in a caravan? And why would you choose a gasless caravan over the traditional system? Here are six reasons to think about opting for a gasless caravan for your next off-road adventure.

1. It can be a safer way to enjoy a caravan adventure

When you choose to do without gas inside your caravan, it can be a safer way to experience an off-road, off-grid holiday. There are a few reasons why.

When you have your whole family living inside a 21ft space, you don’t want to think about the (very remote) possibility of gas leaks inside your caravan. It’s highly unlikely ever to occur, but going gasless can take this worry away altogether.

Then there’s the nature of induction cooktops themselves. This relatively new method doesn’t use burners underneath the cooking surface, instead heating pots and pans directly using electromagnetic energy.

It’s a much more efficient way to cook, converting more energy into heat. And, since there’s no open flames, it can be safer around your family too.

2. You can still choose to cook (outside) with gas!

One important point to remember is that going “gasless” with induction cooking doesn’t mean having no gas available at all. Even though induction cooking offers you an instant cooking experience (and even gives you more bench space inside your van), you can still have the option of ‘cooking with gas’ on your caravan adventure.

So if you just can’t bear to say goodbye to those flame-grilled steaks, you don’t have to! You can still cook with gas outside your van on a BBQ, even with a gasless interior. This setup can even give you more flexibility, since you won’t be locked into cooking with just one source of energy.

3. Gasless interiors help your caravan remain dust-free

The latest off-road caravans are designed to be fully dust-free – which you’ll find is a big advantage when you’re travelling around Australia.

But when you cook with gas inside a caravan, you’ll need to open up the van’s vents for safety. That means potentially letting in that road dust you’ve worked so hard to keep out – not to mention the armies of insects that will be drawn to the smell of your dinner!

Instead, a gasless caravan allows you to cook using induction, with no need to open vents for ventilation. You can stay comfy inside, with your caravan’s air con running off the battery system.

4. Your gas bottles will tend to last longer

With a gas-free caravan, your hot water and the internal air heater will be run off the same diesel tank. You won’t be using up gas bottles just to stay comfortable and enjoy your caravanning experience.

And, since you won’t be using gas for your hot water, you’ll notice your BBQ gas bottles will last a lot longer – meaning you can stay off-grid for longer too. And speaking of this point…

5. Gasless interiors can help you stay off-grid for longer

When you cook inside your caravan on the induction cooktop, you won’t be restricted by the available gas. Instead, the cooktop will be powered by the van’s battery bank which will regenerate from the solar panels.

This means that, if you ever run out of gas with your outside BBQ bottles, you won’t have to go hungry or cut short your off-grid adventure! You’ll still be able to comfortably cook inside your van on the induction cooktop.

Oh – and in the case of very cold or hot weather, you can rest easy, since the caravan’s air conditioner runs off the battery bank too!

6. It’s no more expensive than a caravan with gas

At Zone RV, because induction cooktops and heater – and BBQ gas bottles – come as standard in our off-road caravans, it’s no more expensive to choose a gasless interior for your caravan. You can enjoy all of the benefits we’ve talked about, at no additional cost.

MY24 Gas Less Off Road Caravans

Enjoy a detailed walkthrough of our MY24 Gas Less Off Road caravan walk through. Showcasing all the features we have added to give you a safer off road experience.

Start Your Journey

If you’d like to find out more about our 100% made-in-Australia composite off-road caravans, view our range today and build the caravan perfect for your adventures!

Aussie RVs Receive 3D Printing Boost from $1.16M Government Grant

Written by Vanessa Listek – 3D Printers – 3D Printing – Oceania

When air travel took a backseat during the pandemic, road trips in RVs surged in popularity. With international travel plummeting by a staggering 73% in 2020, domestic adventures on four wheels soared. ZoneRV, an Australian game-changer, stepped up, harnessing the power of 3D printing to merge cutting-edge technology with a renewed love for the open road. Buckle up as we journey through their latest innovative strides in the caravan world.

Stationed on the Sunshine Coast, caravan manufacturer Zone RV raised expectations by snagging the title for the largest 3D printer in the Southern Hemisphere. The gigantic system, with a volume of 22m x 5m x 1.6m, showcases Zone RV’s determination to break new ground and strengthens its reputation for off-road caravan production.

 Virtual Smart Factory VSF122 large-area gantry-based machine

Zone RV incorporates technology from the aeronautical and marine industries to build lighter, stronger, safer off-road caravans with all-composite bodies and cabinetry systems. As a result, users can keep the weight below their vehicle’s Gross Combined Mass (GCM). This ensures the caravans can handle Australia’s rough terrains. Zone RV designs these caravans for Australian corrugated roads. They construct them on a custom chassis, complemented by the specially crafted CruiseMaster suspension systems.

Founded in 2016, the company offers a range of Australian-made off-road caravans. Many users have expressed satisfaction with Zone RV’s caravans because they focus on luxury and quality. The attractive starting price of its BASE model, below AUD 100,000 ($64,280), adds to the appeal. Additionally, Zone RV has recently invested in a new $7.5 million, 5,000-square-meter facility in Coolum Eco Industrial Park. This solidifies the company’s standing in the competitive Australian market.

Zone Rv Sojourn & Mode 4×4 Accessoire Composite Canopy

Symbiosis

Zone RV chose the Virtual Smart Factory VSF122 large-area gantry-based machine from CNC Design. This behemoth balances both 3D printing and machining in composite materials.

“At Zone RV, we’re always on the prowl for innovative avenues that enhance our product delivery,” said Zone RV Founder and CTO Dave Biggar. “This monumental 3D printer from CNC Design is exactly the leap we envisioned. Beyond the massive productivity enhancements, it propels our flexibility in design and manufacturing. Having the largest 3D printer in the Southern Hemisphere? It’s a bold testament to Zone RV’s drive to redefine innovation in caravanning and Australian manufacturing as a whole.”

Zone RV installed this high-tech system at its manufacturing hub in June 2022. They mainly use it for trimming and polishing molds and printing blanks for mold creation. Moreover, the business will work shoulder-to-shoulder with CNC Design, pioneering new methods to print large molds directly.

Notably, this large area gantry meshes five-axis milling with three-axis printing — all housed in a single machine. Outfitted with the Siemens SINUMERIK ONE, it’s at the cutting edge of CNC systems today. Five-axis milling is conducted with a 10 kW, 20,000 rpm milling spindle from HSD Mechatronics. This is complemented by swarf extraction, the process used to remove, collect, and dispose of waste material. Alongside this, its 3D printing capabilities are enhanced by the CNC Design Model 30 print head, which can print up to 30 kilograms per hour. Add-in features include five-axis orbital sanding and a built-in tool rack and print head calibration unit. It’s clear that no stone was left unturned in its design.

Moreover, this machine is integral to CNC Design’s transformative VSF concept. It’s redefining the production of sizeable components in diverse sectors, from construction to entertainment. This VSF initiative also signifies adaptability, producing parts in various materials ranging from composites and plastics to concrete and wax. CNC Design is carving its niche, catering to the world with some of the greatest additive manufacturing machines, crafting parts up to 30 meters long.

John Croft from CNC Design states, “Zone RV is at the cusp of revolutionizing advanced manufacturing. This new machine doesn’t just give them a leg up; it propels them leagues ahead. We’re beyond thrilled to collaborate, ensuring they milk every ounce of potential from this technological titan.”

Installation Video

State-backed innovation

Thanks to a $1.16 million Made in Queensland (MiQ) grant, Zone RV acquired the 3D printer, expanded production, and created 99 new jobs, fostering local employment and contributing to the state’s economy. After the grant period, the business grew to 231 employees. Through these grants, the Queensland government supports manufacturers and spurs growth in the local industry that currently employs 180,000 Queenslanders.

Building on this momentum over the past five years, the MiQ program has bolstered the region’s economic landscape, generating more than $100 million in private-sector investment. Queensland-based manufacturers who want to replicate Zone RV’s success should apply for MiQ’s Round 6, opening in October 2023.

Minister for Regional Development and Manufacturing, Glenn Butcher and Zone RV Founder David Biggar. Image courtesy of Queensland Government.

Biggar praised the initiative: “This Made in Queensland grant was a great help to the business. We were able to really take the big leaps forward that we wanted to do, thanks to the funding support we received from the Queensland Government. We really enjoy being part of Inside Advanced Manufacturing, also. It’s building connections with our peers and working collaboratively with other manufacturers to help the entire sector thrive. It’s great to be part of something like this.”

Branching out, Biggar also extended the application of this colossal 3D printer to his other ventures, including catamaran manufacturer Cure Marine. Diversifying its use, he mentioned that the brand also used the 3D printer’s capabilities to create the CURE 55 performance cruising catamaran. It was launched in December 2022.

Cure Marine’s Cure 55 catamaran. Image courtesy of Cure Marine.

Zone RV’s incorporation of this significant 3D printer marks a step forward in manufacturing, signaling broader changes across new subsectors. Its diverse applications, from caravan to marine production, highlight the growing role of additive manufacturing. The partnership between Zone RV and CNC Design, bolstered by the Queensland government’s support, represents a collective effort towards a modern, tech-driven Australian manufacturing scene.